Product FAQ´s LanExpert

The Frequently Ask Questions are organized into their respective sections as they pertain to the LanExpert.

---

Question
Under length mode, why do I get funny readings on pins 78?
Answer
Please make sure that the far end of the cable connected to the LanExpert is disconnected from the wiremap terminator or a network device.

Question
Can I measure cables other than network cables?
Answer
The LanExpert only measures copper network cables (ie. CAT3, 5, 5e, 6 and 6e) that have a NVP of 65 to 74.

Question
When I measure a patch cord, do I need to plug both ends into the LanExpert ports?
Answer
To measeure length plug one end of your cable into Port 2. Port 2 is marked on the LanExpert with a yellow outline. The other end of the cable should not be connected to anything. Make sure nothing is connected to Port 1 while making the measurement. Select start to measure the cable.

 

Don't see the question or answer that fits your issue?
Send us your question and we'll respond with an answer.

SUBMIT QUESTION