LanExpert Cable Tests Screen
Port
ID is used to determine which port of a hub or switch is wired
to a particular wall jack by blinking the Link LED on the
port. The blink rate is adjustable for compatibility with
most switches and hubs. Select the rate at which the LED will
blink either slow, medium, fast, fastest. Select START to
run the test.
Select
another test by pressing on the graphical buttons on the bottom
or scroll left and right with the white arrows for more tests.
LanExpert, psiber & Psiber logo are Trademarks of Psiber Data
Systems Inc. • Copyright © 2008 Psiber Data Systems Inc.
• All Rights Reserved |
