LanExpert Profile Name Setup Screen
A
Profile is a user-defined setup configuration. Profiles allow
the user to pre-store setup parameters that are typical for
the network(s) to be tested. There are forty-nine user defined
profiles and one factory default profile. The default settings
cannot be changed. Factory default parameters are set for
a DHCP network. For devices/networks using static IP addresses,
create a new profile.
Select
RETRN after a name is entered for setup configurations.
Select
another test by pressing on the graphical buttons on the bottom
or scroll left and right with the white arrows for more tests.
LanExpert, psiber & Psiber logo are Trademarks of Psiber Data
Systems Inc. • Copyright © 2008 Psiber Data Systems Inc.
• All Rights Reserved
| 
