Link Testers

LanMaster 26 Link Tester

Tests Gigabit, VoIP and Powered Ethernet Ports

The LANMASTER 26 Link Tester provides LAN Installers and Maintainers a tool with the testing capability for Gigabit (1000baseTX) over copper, Fast Ethernet (100baseTX), Standard Ethernet (10baseT) links as well as VoIP/PoE detection.

The LanMaster 26 measures the voltage supplied by the VoIP or PoE port with typical loading to ensure that the voltage level is adequate.

The port ID feature identifies which port on a hub or switch that a wall outlet is connected by flashing the Link light on the connected port.

Features

  • Verifies Connectivity for 10/100/1000BaseTX Links
  • Identifies VoIP and PoE Ports
  • Measures Port Voltage to Ensure Proper Voltage Level and Warns of Low Voltage Levels
  • Identifies Speed, Duplex Mode and Autonegotiation for 10/100/1000 VoIP/PoE Ports
  • Provides Port Identification Function
  • Identifies Connection as LAN, NIC or Auto Crossover
  • Ergonomic Design

Why LanMaster 26

The most advanced Link Tester available:

  • TEST GIGABIT, VoIP and POWERED ETHERNET PORTS
  • VERIFY CONNECTIVITY ACROSS A LAN
  • TEST VOLTAGE OF VoIP AND PoE PORTS

 

The LanMaster 26 features Gigabit over copper Link testing capability and VoIP/PoE detection. The LanMaster 26 even measures the voltage supplied by the VoIP or PoE port with typical loading to ensure that the voltage level is adequate.

The LanMaster 26 tests 10/100/1000BaseTX ports to determine the speed and duplex mode. The port ID feature identifies which port on a hub or switch that a wall outlet is connected by flashing the Link light on the connected port. The LanMaster 26 provides critical network connectivity and configuration information needed to maintain and troubleshoot a LAN at an affordable price.

  • Verifies Connectivity for 10/100/1000BaseTX Links
  • Identifies VoIP (Voice over IP) and PoE (Power over Ethernet) Ports
  • Measures Port Voltage to Ensure Proper Voltage Level and Warns of Low Voltage Levels
  • Identifies Speed, Duplex Mode and Autonegotiation for 10/100/1000/BaseTX Ports
  • Provides Port Identification Function (Link Light Activation)
  • Identifies Connection as LAN, NIC or Auto Crossover

The LanMaster 26 identifies the speed and duplex mode of equipment connected to a Link. Hub/Switch (managed or unmanaged) and NIC configuration is displayed instantly.

The LanMaster 26 is an ideal tool for quickly testing proper LAN operation after completing a Move, Add or Change (MAC).

Specifications

 

Physical

Dimensions: 6.8 in. x 1.4 in x 1.3 in. 17.3 cm x 3.6 cm x 3.3 cm

Weight: 4.0 ounces (w/batteries) 114 grams

 

Power

One 9 Volt Alkaline Battery (Included)

 

Environment

Operating Temperature: 0 to 50 C

Storage Temperature: -10 to 55 C

 

Network Connection: Type 10baseT/100base /1000baseTX

Detected Power: 40+ VDC - Good, 18 - 40Volts DC - Bad

Connector Type: RJ-45

Product design and specifications subject to change without notice.

 

MADE IN USA. Some features may not be available for all countries or all areas. See your distributor for details. Application availability and pricing are subject to change.