What's New
LANEXPERT™
Inline Gigabit Network Analyzer Provides Comprehensive Test
and Analysis Capabilities at a Budget Supporting Price
(San Diego, CA January 5, 2009) - Psiber Data Systems®
Inc. today announced the launch of a handheld Network Analyzer
that features protocol analysis, packet capture, traffic generation,
cable testing and IPv4/IPv6 support. The LANEXPERT™
utilizes a color touch screen interface to access one of the
most complete suites of test and analysis functions available
in a portable test tool. The Inline Mode allows users to non-intrusively
monitor network traffic (10/100/1000BaseTX) to identify protocols,
port usage, VoIP statistics and network utilization. The LANEXPERT™
can capture and store up to 10,000 packets with user defined
filters for detailed analysis in the field or downloaded over
the network or to a USB flash drive. Using either RJ-45 port,
tests including Ping, Link, Trace Route, DHCP and Discovery
are used to quickly identify network problems. The LANEXPERT™
can generate up to 100% traffic loading with control of packet
rate and size to demonstrate network performance at various
traffic levels. Additionally, a stress test that generates
traffic and measures performance metrics, in accordance with
RFC 2544, is also provided. Stress tests can be conducted
using the two independent ports on a single unit or used with
a second unit located remotely on a network. PoE tests include
voltage and inline current measurement to determine the actual
power used by a powered device. The LANEXPERT™
also tests cables for shorts, opens, split pairs, reversed
pairs, measures cable length and generates tones for cable
tracing.
The LANEXPERT™ is an essential
tool for installing, maintaining, upgrading, troubleshooting
and optimizing complex and constantly changing networks. This
comprehensive network analyzer allows users to deliver robust
and highly available network services with a single test device.
LAN installers, technicians, managers and service providers
can now get expert network help at an affordable price. US
List Price for the LANEXPERT™
is $1895 and will be available February 1, 2009.
The Company: Psiber Data Systems Inc., located in San Diego,
California, USA, with affiliated companies in Germany, Italy
and UK, is a privately held corporation, committed to the
development, manufacture and marketing of electronic test
instruments for the data communications market. Psiber was
founded in 1994 and products include the LanMasterŽ Link Testers,
PingerŽ IP Tester and Cable TrackerŽ Network ID Kit, which
have established a new class of computer Local Area Network
(LAN) performance, test and diagnostic tools.
For further information contact Bruce Nelson, Psiber Data Systems Inc., 7075-K Mission Gorge Road, San Diego, CA 92120, 616-891-2467, bnelson@psiber.com.
Psiber Data Systems Discontinues the Distrubrution of the CableTool Underground Locator (CT200).
(San Diego, CA, December 1, 2008 ) - Psiber Data Systems® Inc., a leader in network testing, announces it will discontinue the sales and distrubrution of the CableTool Underground Locator (CT200) as of December 1st, 2008.
For further information contact Bruce Nelson, Psiber Data Systems Inc., 7075-K Mission Gorge Road, San Diego, CA 92120, 616-891-2467, bnelson@psiber.com.
Psiber Data Systems Announces First Low Cost PoE Tester.
(San Diego, CA, February 3, 2006 ) - Psiber Data Systems® Inc., a leader in network testing, announces the release the LanMaster 35 Power Link Tester model LM35. The LM35 represents a new class of tester devoted to identifying PoE and VoiP application readiness as well as traditional 10/100/1000 link signals, TDR, and tone functions. No other tester in it's class will identify PoE and it's component voltages or classes.
Psiber Data Systems Inc. designs, manufactures and markets worldwide test tools for LAN installers, service providers, IT technicians and managers.
For further information contact Bruce Nelson, Psiber Data Systems Inc., 7075-K Mission Gorge Road, San Diego, CA 92120, 480-775-2523, bnelson@psiber.com.
Psiber Data Systems® Inc., the leader in low cost active network diagnostic testing, announces the introduction of the new Pinger Plus+™ Network IP Tester. The Pinger Plus+™ features full 10/100 PING capability as well as 10/100/1000 Link testing. These new features are in addition to the DHCP Client capability and Port Identification features of the original Pinger. Network maintainers commonly run PING tests from laptop computers to verify connectivity when troubleshooting a problem. The Pinger Plus+™ replaces expensive and fragile laptop computers with an affordable and rugged test device. The Pinger Plus+™ is highly advanced test tool that fits in a shirt pocket. The Pinger Plus+™ incorporates four new major test functions: 10/100/1000 link identification; 10/100 PING capability; eight programmable profiles (source and destination IP addresses, gateway IP address and subnet mask); and setup from a web browser. The Pinger Plus+™ provides a comprehensive array of PING test capabilities that include PINGing a prestored list of IP addresses, PINGing a range of IP addresses, continuously PING an IP address up to 99 times and vary the PING packet length. The Pinger Plus+™ provides the most powerful set of PING features ever put in a low cost handheld tester. Anyone looking to capitalize on the power of PING in a diagnostic tool needs a Pinger Plus+™.
Psiber Data Systems® Inc., the leader in low cost active network diagnostic and CATV testing, is pleased to announce the introduction of the new Model CT200 CableTracker U/G Underground Cable and Pipe Locator. The CableTracker U/G features dual transmitter frequency locating capability normally found on expensive locators for a fraction of the price. Cable locating requires the best methods and standards for effective locating. The CableTracker U/G incorporates dual frequency technology in the 2 and 33khz bandwidths for effective locates without excessive signal bleed over. Many locators today use higher frequencies that bleed into other underground assets, causing false readings and wasted digging time. By using the low 2khz signal, minimal coupling occurs, saving contractors time and money. The CableTracker U/G incorporates many useful features. The CableTracker U/G has null or peak tracking capability, a 45 degree indicator, low battery light, adjustable gain, very lightweight receiver (less than 1 pound), and common batteries for easy replacement. The optional induction clamp Model CT200C allows for indirect cable connection when required.
Psiber Data Systems®, Inc.,
The CableTracker Network Tone and Probe Kit model CTK1015 is designed for network managers and technicians. Toning an active LAN circuit can disrupt network traffic and is difficult to track due to cable twist and tone bleed. The CableTracker Network Tone and Probe Kit features a Port ID function that blinks the link light verifying cable connectivity. This feature also provides a simple and effective method to identify switch or hub port assignments on active networks. Three different blink rates are provided to ensure compatibility with equipment from a wide range of manufacturers. Traditional toning with two different tone frequencies and patterns is provided for non-active circuit tracing. The CableTracker Network Toner Model CT10 has a female RJ-45 connector for easy network connection as well as alligator clips for connecting to a punch down block or unterminated cables. Auto power down extends battery life and a built-in low battery indicator warns when battery replacement is required. The CableTracker Network Probe Model CT15 incorporates volume control, non-conductive plastic tip, and complete compatibility with existing toners.
Psiber Data Systems®, Inc., a leader in low cost cable testing devices, recently announced the introduction of a new flagship tester to their line. The new tester, known as the CableTool™ Multifunction TDR, is targeted at cabling installation and maintenance market. CableTool™ provides cable installers and maintenance personnel with a device that actually tells the user the distance to a short or cut in a cable. CableTool™ does this by a simple readout in feet or meters of the distance from CableTool™ to the fault. A connection is made to the cable in question, a simple calibration function is performed and the distance to the problem is displayed on the unit. CableTool™ is perfect for finding faults beneath drywall, underground, or in ceilings. CableTool™ also works as an inventory tool to measure how much cable is on a spool or reel. No termination device is needed. Measuring is done from one end. The CableTool combines TDR technology with an easy-to-use menu driven interface. CableTool provides the user with an available library of over 60 preset cable settings to choose from as well as 4 custom library memory slots for custom calibration. CableTool also is the most accurate TDR in it's class, with results of less than 2% error plus 1 foot. CableTool™ also comes with 16 tracing tones built in and the ability to read up to 250 volts.
Psiber Data Systems introduces the Pinger Network IP Tester. The Pinger is an entirely new type of handheld test tool used for installing and maintaining computer Local Area Networks (LANs). Ping, DHCP client emulation and Port Identification are the key features that are provided in the unit. The Ping function is used to verify connectivity, check transmitted and received data integrity, indicate network traffic loading by measuring Round Trip Time, notify of duplicate IP Address responses, provide the MAC address of an IP Address and warn when the default gateway can not be located. The Port ID mode is used to identify which port on a hub or switch that a wall outlet is connected. The Pinger is the first tester to offer Port ID with selectable blink rates that are required by different types of LAN equipment. DHCP Client emulation allows the unit to log on to the network, locate the DHCP server and then display the assigned IP address as well as the Gateway IP address and the Subnet Mask.
Psiber Data Systems releases the latest product in the LanMaster product family. The LanMaster 30 Outlet Identifier is designed to quickly identify the type of network or telephone connections present on the RJ-45 jacks of a wall outlet. The Model 30 will identify a 10baseT Link, 100baseTX Link, Token Ring Link, Analog Telephone Line, PBX Line or an ISDN Line. The unit will also warn the user if unidentified signals are present at the jack or if the jack is not connected. The LanMaster 30 is the first handheld tester that combines telephone, Ethernet and Token Ring capabilities in a single instrument.
Psiber Data Systems Inc. introduces a NEW Fast Ethernet tester in the LanMaster product line. The LanMaster 25 verifies Link connectivity, detects reported faults and identifies equipment configuration. A new transmit feature outputs Link signals to verify two-way communication, identify connected hub/switch ports and provides a tone generator for tracing cables with a tone probe.
Psiber Data Systems Inc. announces a Fast Ethernet handheld LAN tester. In less than 3 seconds the LanMaster 20 verifies Link connectivity, detects reported faults, identifies far-end equipment configuration and displays Link support for Fast Ethernet.
Psiber's LanMaster 20 Link Tester PC Magazine Locates the Missing Link. The LanMaster 20 is featured in the Net Tools section of the July '98 issue. "It's ease of use, speed, and affordable price makes this wand-like device a must-have for your network toolbox." states Craig Ellison of PC Magazine.
The LanMaster 20 Link Tester is featured in CABLING BUSINESS MAGAZINE, April 1998 Edition. The Cabling Business Magazine article provides an excellent overview of Link Signal Protocol and LanMaster 20 features and applications.
Psiber's psiberNet 1000 gets a "Hot Products" award and recognition from Data Communications magazine.